Home :: Electrical :: Husqvarna HPI Ignitions

Husqvarna HPI Ignitions

Products

HPI Complete Ignition 1971-1981 Husqvarna CR WR OR XC 250 400 - 13mm crank end, 109mm OD stator plate
SKU: 068K199-R149
HPI Complete Ignition 1971-1981 Husqvarna CR WR OR XC 250 or 400

13.57mm small end crank taper. 109mm OD for the stator mounting plate. This is a direct replacement for the motoplat mini 6 ignition. Double check your engine before ordering.

The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has no lighting coils. It is for motocross use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes.

All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, add an extra hole, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.
$274.95
Qty
Add to wish list
HPI Complete Ignition 1971-1981 Husqvarna CR WR XC 125 ; 84-91 CR 250
SKU: 068K177

Fits the following models:
1971-1981 Husqvarna CR 125
84-91 CR 250

13.57mm small end crank taper. 90mm OD for the stator. Stator bolts directly to the engine case. 

The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has no lighting coils. It is for motocross use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes. 

All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.
 

$274.95
Qty Out of stock
HPI Complete Ignition 1981-1988 Husqvarna WR CR XC 430
SKU: 068K356
The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has no lighting coils. It is for motocross use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes.

All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.
$274.95
Qty
Add to wish list
HPI Complete Ignition 1981-1988 Husqvarna WR CR XC 430 w/ Lighting Coil
SKU: 210K356

New HPI Complete Ignition 1981-1988 Husqvarna WR CR XC 430 w/ Lighting Coil.

Stator plate measures 94mm in diameter. Crank taper should measure approximately 14mm on the small end.

The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has lighting coils. It is for motocross or enduro use. You will need a rectifier and light switch to run lights.

HPI is the go to source for electronic ignitions for vmx and pvmx bikes. Any warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.

$274.95
Qty Out of stock
HPI Complete Ignition 1983 1984 1985 1986 Husqvarna CR 500
SKU: 068K195
The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has no lighting coils. It is for motocross use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes.

All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.
$274.95
Qty
Add to wish list
HPI Complete Ignition for 1974 Husqvarna CR 400 - Large Rotor Hole
SKU: 068K199-R145
Measure your crank BEFORE you place an order please.

The end of your crank should measure approximately 19mm where the taper starts. The large side of the taper is 24mm. The mounting plate measures 109mm in OD.

The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has no lighting coils. It is for motocross use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes.

All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no problems. We have sold 100's of units with no returns or warranty claims.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.
$274.95
Qty Out of stock
HPI Digital CDI Curve Switch
SKU: 068v064
HPI Digital CDI Curve Switch

This only works with the HPI programmable 2 map CDI.

$14.95
Qty Out of stock
HPI Interface Cable and Tuning Software Download for the Programmable CDI
SKU: 068v043
HPI Interface Cable and Tuning Software Download for the Programmable CDI

This only works with the HPI programmable single or dual map CDI.

$164.95
Qty
Add to wish list
HPI Programmable Digital CDI w/ 2 Preset Curves
SKU: 068C042-2CP
HPI Programmable CDI with 2 maps.

You still need to purchase the HPI curve switch and tuning software kit to use this CDI to it's potential. It will only work with HPI kits. Does not work with your OEM electrical components.

Works as an upgrade for the following kits:
068K004, 068K008, 068K009, 068K010, 068K011, 068K012, 068K013, 068K014, 068K015, 068K016, 068K017, 068K026, 068K029, 068K039, 068K040, 068K047, 068K048, 068K050, 068K051, 068K053, 068K055, 068K056, 068K059, 068K063, 068K067, 068K069, 068K070, 068K072, 068K076, 068K086, 068K094, 068K095, 068K096, 068K099, 068K102, 068K104, 068K110, 068K126, 068K129, 068K134, 068K135, 068K140, 068K141, 068K156, 068K159, 068K168, 068K177, 068K189, 068K191, 068K196, 068K199, 068K214, 068K215, 068K221, 068K223, 068K231, 068K240, 068K244, 068K247, 068K266, 068K274, 068K286, 068K288, 068K292, 068K298, 068K299, 068K319, 068K336, 068K337, 068K343, 068K352, 068K392, 068K421, 068K425, 068K432, 068K444, 068K456, 068K457
$224.95
Qty
Add to wish list
HPI Racing Ignition Inner Rotor 68 Series Flywheel Puller
SKU: 068V262

HPI Ignition universal inner rotor flywheel 68 series puller.

$12.95
Qty
Add to wish list
HPI Racing Ignition Inner Rotor 68 Series Flywheel Weight 10 Ounce
SKU: 068V101
HPI Ignition flywheel weight. 10 ounces. These only work with the HPI flywheels. They will not work on stock ignitions.
$34.95
Qty
Add to wish list
HPI Racing Ignition Outer Rotor 210 Series Flywheel Puller M27 1mm Left Hand Thread
SKU: 210V251
HPI Racing Ignition Outer Rotor 210 Series Flywheel Puller M27 1mm Left Hand Thread
$12.95
Qty
Add to wish list
HPI Racing Ignition Outer Rotor 210 Series Flywheel Weight 10 Ounce
SKU: 210V257
HPI Ignition flywheel weight. Outer rotor style. 10 ounces. These only work with the HPI flywheels. They will not work on stock ignitions.
$34.95
Qty
Add to wish list
HPI Stator for Husqvarna 4 Stroke 83-94 TC TE WXC 350 510 610
SKU: ST5051L
Fits the following models:
TE 350 (1990-1994), WXC 350 (1992-1994), WXE 350 (1991-1994), TC 500 (1983), TC 510 (1987-1990), TE 510 (1983-1990), TX 510 (1983-1988), WMX 510 (1990), WXE 510 (1990), TC 610 (1992-1994), TE 610 (1992-1994), WMX 610 (1991), WXC 610 (1992-1994), WXE 610 (1991-1994)

The kit includes a new stator only. HPI is the go to source for electronic ignitions for vmx and pvmx bikes.

All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.
$249.95
Qty
Add to wish list
New HPI Complete Ignition 1977 1978 1979 Husqvarna 390
SKU: 210K414
New HPI Complete Ignition 1977 1978 1979 Husqvarna 390

The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has lighting coils. It is for motocross use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes.

All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.
$274.95
Qty Out of stock
New HPI Complete Ignition 1981-1991 Husqvarna WR & CR 125
SKU: 210K454
New HPI Complete Ignition 1981-1991 Husqvarna WR & CR 125

The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has lighting coils. It is for motocross use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes.

All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.
$274.95
Qty
Add to wish list
New HPI Complete Ignition 1992 1993 1994 Husqvarna CR WR WXC 250
SKU: 210K250

New HPI Complete Ignition for the 1992 1993 1994 Husqvarna CR WR WXC 250

The stator plate OD is 90mm. Measure your stock stator plate to be sure this is the one you need.

The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has lighting coils. It is for motocross use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes.

All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.

$274.95
Qty Out of stock
New HPI Complete Ignition 2000-2013 Husqvarna WR 125 250 360
SKU: 210K331
New HPI Complete Ignition 2000-2013 Husqvarna WR 125 250 360

The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has lighting coils. It is for motocross or enduro use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes.

All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.
$274.95
Qty Out of stock
New HPI Ignition 1978 1979 1980 1981 Husqvarna WR 250 w/ Lighting Coil
SKU: 210K338
New HPI Ignition 1978 1979 1980 1981 Husqvarna WR 250 w/ Lighting Coil. The rotor weighs a little over 2 pounds.

The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has lighting coils. It is for motocross or enduro use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes.

All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues. We have a 99% success rate with all issues being resolved in a timely manner.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.
$284.95
Qty
Add to wish list