Home :: Fork Tubes

Fork Tubes

Products

New Reproduction Front Fork Tubes that fit 1981 1982 1983 Maico MC 250 400 440 490 #6637
SKU: DCFT-1981MAI
  • Easily replace fork tubes that are pitted, corroded or are bent.
  • Industrial hard chromed, then centerless ground with tolerances held to +/- 0.02mm (0.00078in.) for accurate fit and longevity.
  • Sold in pairs.
  • Uses all stock hardware and internals. No mods required.
  • 220HBS hardness. AISI SAE 1045 carbon steel.
  • Replaces OEM Maico part number 6637
  • 750mm in length
  • 42mm in diameter
$299.95
Qty
Add to wish list
New Reproduction Front Fork Tubes that fit 1976 1977 1978 Maico AW Magnum MC GS 250 400 440 #3790
SKU: DCFT-1976MAI
  • Easily replace fork tubes that are pitted, corroded or are bent.
  • Industrial hard chromed, then centerless ground with tolerances held to +/- 0.02mm (0.00078in.) for accurate fit and longevity.
  • Sold in pairs.
  • 220HBS hardness. AISI SAE 1045 carbon steel.
  • Replaces OEM Maico part number 3790
  • 27.50 inches in length
  • 37.95mm in diameter
  • Also includes 2 of part number 3789 piston ring for damper tube that need to be used.
$259.95
Qty
Add to wish list
New Dachi Front Fork Tubes for 1984 1985 Yamaha IT 200 IT200 43mm
SKU: DC351-4124
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. An OEM replica quality part. No chinese junk here. 43mm OD tubes. Replaces OEM part number 43M-23110-L0-00.
$249.95
Qty
Add to wish list
New Repro Front Fork Tubes that fit 1979 Maico Magnum MC GS 250 400 440 #6222
SKU: DCFT-1979MAI
  • Must use a 1978 model threaded cap. The top is threaded.
  • Easily replace fork tubes that are pitted, corroded or are bent.
  • Industrial hard chromed, then centerless ground with tolerances held to +/- 0.02mm (0.00078in.) for accurate fit and longevity.
  • Sold in pairs.
  • 220HBS hardness. AISI SAE 1045 carbon steel.
  • Replaces OEM Maico part number 6222
  • 27.50 inches in length
  • 37.95mm in diameter
$249.95
Qty
Add to wish list
New Reproduction Front Fork Tubes that fit 1968-1974 Maico External Fork Spring Forks
SKU: DCFT-1968MAI

 

  • Finally, replacement tubes for the external fork spring maico forks.
  • Easily replace fork tubes that are pitted, corroded or are bent.
  • Industrial hard chromed, then centerless ground with tolerances held to +/- 0.02mm (0.00078in.) for accurate fit and longevity.
  • Sold in pairs.
  • 220HBS hardness. AISI SAE 1045 carbon steel.
  • 26.875 inches in length
  • 36mm in diameter
  • Threaded top nut and has a circlip slot at the bottom.
$249.95
Qty
Add to wish list
New Dachi Fork Tubes for 1981 Yamaha YZ 125 and 1981 IT 250 465 38mm
SKU: DC351-4120
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. An OEM replica quality part. No chinese junk here. 38mm OD tubes. Replaces OEM part number 4V2-23110-L0-00.
$239.95
Qty
Add to wish list
New Dachi Front Fork Tubes for 1977 1978 Yamaha YZ 400 38mm
SKU: DC351-4146
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. Replaces OEM part number 2K8-23110-L0-00. 38mm outside diameter.
$239.95
Qty
Add to wish list
New Dachi Front Fork Tubes for 1980 Yamaha YZ 250 465 38mm
SKU: DC351-4148
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. Replaces OEM part number 3R4-23124-L0-00. 38mm outside diameter.
$239.95
Qty
Add to wish list
New Dachi Front Fork Tubes for 1982 Yamaha YZ 125 and 1982 IT 175 250 465 38mm
SKU: DC351-4121
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. An OEM replica quality part. No chinese junk here. 38mm OD tubes. Replaces OEM part number 5X4-23110-L0-00.
$239.95
Qty
Add to wish list
New Front Fork Tubes that fit 1974 1975 1976 Husqvarna 250 360 400 450 Black Leg Forks
SKU: DC45-43100/43101
  • Easily replace fork tubes that are pitted, corroded or are bent.
  • Industrial hard chromed, then centerless ground with tolerances held to +/- 0.02mm (0.00078in.) for accurate fit and longevity.
  • Sold in pairs.
  • 220HBS hardness. AISI SAE 1045 carbon steel.
  • Replaces OEM HSQ part number 15 12 170-01
  • 23.25 inches in length
  • 35mm outer diameter
  • 28.70mm inside diameter
  • These include the bottom nut.
  • These tubes will work on the 66-73 250 and up model lower legs if you use the later model internals and cap.

These tubes were made for restorations and grass track racing. If you are racing on modern mx tracks with large jumps, you may bend the tubes. 

$224.95
Qty
Add to wish list
1980 Honda CR 125 ; 1978 1979 1980 CR 250 Elsinore 37mm Fork Tubes
SKU: DC351-1115
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations.


$219.95
Qty
Add to wish list
New Dachi Fork Tubes for 1968 1969 Yamaha DT1 250
SKU: DC351-4441
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. An OEM replica quality part. No chinese junk here. These tubes do narrow at the clamps just like the stock ones. They are not 34mm the entire length. Check your clamps to make sure these are what you need.

These tubes have six bleed holes at the bottom and no groove for a retaining clip near the bleed holes. Compare with your original tubes to be sure they are what you need.

These may work on the 1970 model but the bottom of the tubes differ slightly.
$219.95
Qty
Add to wish list
New Dachi Fork Tubes for 1971-1976 Yamaha DT1 RT1 DT2 RT2 DT 250 360 400 34mm
SKU: DC351-4444
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. 34mm OD.

Replaces yamaha part number 291-23124-60-00
$219.95
Qty
Add to wish list
New Dachi Fork Tubes for 1974-1976 Suzuki TS 250; 74-77 TS 400
SKU: DC351-3445

A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations.

23.625" long

34mm diameter

$219.95
Qty
Add to wish list
New Dachi Fork Tubes for 1979 1980 Suzuki 125 RM 250 400 38mm
SKU: DC351-3117
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. 29.50" in length.

Replaces OEM Part # 51110-40300

$219.95
Qty
Add to wish list
1974 1975 1976 Kawasaki KX 125 KX125 31mm Fork Tubes
SKU: DC351-2111
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. 31mm diameter.

$209.95
Qty Out of stock
1975 1976 Honda CR 250M ; 1976 MR 250 Elsinore Fork Tubes 51410-381-003
SKU: DC351-1132
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations.

Replaces OEM part number 51410-381-003

$209.95
Qty
Add to wish list
1975 1976 Kawasaki KX 250 400 KX250 KX400 Fork Tubes 36mm
SKU: DC351-2133
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. 36mm diameter.

Replaces OEM part number 44013-046

$209.95
Qty
Add to wish list
1976 1977 1978 Honda CR 125 CR125 Elsinore 35mm Fork Tubes
SKU: DC351-1113
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations.

$209.95
Qty
Add to wish list
New Dachi Fork Tubes for 1974 1975 Honda CR 125 & 74-76 MT 125 Elsinore
SKU: DC351-1112
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. An OEM replica quality part. No chinese junk here.

These tubes are the threaded cap style. You have to use the 1974 caps.
$209.95
Qty
Add to wish list