Home :: Clutch Products :: Husqvarna

Husqvarna

Products

1975-1981 Husqvarna 125 250 360 390 Billet Alloy Clutch Basket Cush Drive
SKU: HVA-1975CLBASKET
Husqvarna Clutch Basket Early Cush Drive Type 161114901 / 16-11-149-01

Husky 5 spring cush drive basket

Will fit various years and models. Double check your basket before ordering.

$149.95
Qty Out of stock
1975-1984 Husqvarna 125 250 360 390 430 Clutch Fiber & Steel Plates for the 5 spring clutch
SKU: HVA-CLUTCHPLATES
Husqvarna 16-11-157-01 & 16-11-158-01

High quality clutch kit for all huskys with 5 springs clutches from 1975-1984. 6 x Fiber Plates and 5 x plain Steel Discs. TOTAL Stack Height is 28.5mm

For bikes using the clutch hub 16-11-156-01

Note some late 1984 and onward bikes with the hub 16-15-088-01 use a higher stack.

$104.95
Qty Out of stock
1982 1983 1984 Husqvarna 250 430 500 5 Clutch Spring Set Medium
SKU: HVA-CLSPRINGS
1982 1983 1984 Husqvarna 250 430 500 5 Clutch Spring Set Medium

A quantity of 1 gets you 5 springs.



$20.95
Qty
Add to wish list
1982 1983 1984 Husqvarna 250 430 500 Billet Alloy Clutch Basket 5 Spring
SKU: HVA-1982CLBASKET
Husqvarna Clutch Basket 161120301 / 16-11-203-01

Husky clutch basket 82 - 84 5 spring

All 240/250/430/500 bikes with the 5 spring clutch...

Made exclusively for HVA Factory by Talon.
$134.95
Qty Out of stock
1998-2004 Husqvarna CR WR 125 144 Mitaka UK Billet Clutch Basket
SKU: 917.7204
1998-2004 Husqvarna CR WR 125 144 Mitaka UK Billet Clutch Basket

This basket has the splined center hole. It is different than the later model 2005 & up basket.

So how does a billet basket such as Mitaka help. Well obviously if it is made from a harder material, this would be a "good thing". Well Mitaka baskets are made from 7075T6 alloy, the strongest and hardest commercially available material. The problem with all high strength aluminium alloys is that they deteriorate significantly at temperatures above 170 -200 degrees. This is why one rider will experience finger grooving after just one race, whilst another will get a full season out of a basket. As you will see from the specifications laid down for 7075 alloy, it is produced almost exclusively for aerospace applications and quality control for this particular material is so stringent that it is virtually impossible that a 10 ft bar could have, so to speak, a soft inch in the middle. If a basket grooves up, it is not a material or manufacturing fault. Mitaka baskets are manufactured in the UK.

You have to remove the stock gear by grinding the rivets on the backside of the basket. This basket includes screws to attach the stock gear to your new basket.
$135.55
Qty
Add to wish list
2005-2013 Husqvarna CR WR 125 150 Mitaka UK Billet Clutch Basket
SKU: 917.7205
2005-2013 Husqvarna CR WR 125 150 Mitaka UK Billet Clutch Basket

So how does a billet basket such as Mitaka help. Well obviously if it is made from a harder material, this would be a "good thing". Well Mitaka baskets are made from 7075T6 alloy, the strongest and hardest commercially available material. The problem with all high strength aluminium alloys is that they deteriorate significantly at temperatures above 170 -200 degrees. This is why one rider will experience finger grooving after just one race, whilst another will get a full season out of a basket. As you will see from the specifications laid down for 7075 alloy, it is produced almost exclusively for aerospace applications and quality control for this particular material is so stringent that it is virtually impossible that a 10 ft bar could have, so to speak, a soft inch in the middle. If a basket grooves up, it is not a material or manufacturing fault. Mitaka baskets are manufactured in the UK.

You have to remove the stock gear by grinding the rivets on the backside of the basket. This basket includes screws to attach the stock gear to your new basket.
$135.55
Qty
Add to wish list
2006 2007 Husqvarna TC 250 450 Mitaka UK Billet Clutch Basket
SKU: 917.7301

2006 2007 Husqvarna TC 250 450 Mitaka UK Billet Clutch Basket 

Does not include the stock ring gear. You have to grind off the rivets and install your gear on this basket. 

Will also fit 2007 SMR 510 and 2009 SM 530RR

So how does a billet basket such as Mitaka help. Well obviously if it is made from a harder material, this would be a "good thing". Well Mitaka baskets are made from 7075T6 alloy, the strongest and hardest commercially available material. The problem with all high strength aluminium alloys is that they deteriorate significantly at temperatures above 170 -200 degrees. This is why one rider will experience finger grooving after just one race, whilst another will get a full season out of a basket. As you will see from the specifications laid down for 7075 alloy, it is produced almost exclusively for aerospace applications and quality control for this particular material is so stringent that it is virtually impossible that a 10 ft bar could have, so to speak, a soft inch in the middle. If a basket grooves up, it is not a material or manufacturing fault. Mitaka baskets are manufactured in the UK.

$165.67
Qty
Add to wish list