FENDER MOUNTING HARDWARE KIT FOR PLASTIC FRONT FENDER
(32 pieces) to secure the stock plastic front fender on many early Yamaha dirt bikes. These parts are faithful reproductions of the originals.
You get all items pictured to attach a high mounted a plastic front fender to either cast iron or aluminum triple clamps:
- 4 bolts M6-1.0 X 30mm long for use with aluminum triple clamps (97323-06030-00)
- 4 bolts M6-1.0 X 25mm long for use with cast iron triple clamps (97323-06025-00)
- 4 flat washers (90201-06067-00)
- 4 lock washers (92995-06100-00)
- 4 collar washers (90387-06388-00)
- 8 rubber grommets (322-21541-00-00)
This setup was used to attach the high plastic front fenders on many bikes including:
YZ80 A, B, C
YZ125 A, B, C
YZ250 A, B, C
YZ360 A, B
YZ400 C
MX100 A, B
MX125 A, B, C
MX175 A, B
MX250 A, B
MX400 B
DT2MX
RT2MX
SC500 A
TT500 C, D, F, G, H
DT100 A, B, C
DT125 A, B, C
DT175 A, B, C
DT250 A, B, C
YZ 125 250 400 77-79
YZ 100 76-79
1979 Honda CR 125 Airbox Cover
There are no ribs or moldings on the underside of the part.
Replace that worn out metal base with a durable, lightweight plastic replica. Seat brackets are not included.
You will need to remove your stock metal brackets and rivet them to this base. Or, have a local machine shop make a set for you.
Brand new, injection molded front number plate that fits the 1982 Honda CR 125, 250 and 480 models. A replica of the OEM honda front number plate.
This bolts to your top triple clamp. It also uses one zip tie on each fork leg behind the plate. It is not vented like the OEM plate. Tahitian red color.
Proudly made in the USA.
Available in red or gray.
Brand new, injection molded front number plate that fits the 1982-1994 Honda CR 125, 250, 450, 480 and 500 models.
A perfect replica of the OEM honda front number plate.
To fit on the 82-83 models, you do have to secure it to the forks with zip ties and snip off the bottom mounting lugs.
Proudly made in the USA.
Brand new, injection molded front number plate that fits the 1983 Honda CR 125, 250 and 480 models. A replica of the OEM honda front number plate.
This bolts to your top triple clamp. It also uses one zip tie around each fork leg on the back of the plate.
Proudly made in the USA.
Will fit the following models:
1983 Honda CR 125
Will fit the following models:
1983 Honda CR 250/480
These are a universal fitment. May work on other models as well. They were originally offered by Maier.
Replaces OEM part number 613A0-KF0-000ZA CASE SET *R119* and 61301-KF0-000ZB CASE *NH138*.
Will also fit the following models in white:
1986 XR200R A HEADLIGHT
1987 XR200R A HEADLIGHT
1987 XR600R A HEADLIGHT
1988 XR200R A HEADLIGHT
1988 XR600R A HEADLIGHT
1989 XR600R A HEADLIGHT
1990 XR200R A HEADLIGHT
1991 XR200R A HEADLIGHT
1993 XR200R A HEADLIGHT