- per page
1971 1972 Yamaha JT1 60 Mini Enduro Front Fender Guard
Aftermarket style. Available in white or black. They have a textured finish.
Also fits the 73-82 GT1, GT80 & MX80
For the following models:
1972 Yamaha DT2MX / RT2MX
1973 Yamaha MX 250 / 360
1974 Yamaha YZ 250 / 360
Available in gray, yellow or white.
FENDER MOUNTING HARDWARE KIT FOR PLASTIC FRONT FENDER
(32 pieces) to secure the stock plastic front fender on many early Yamaha dirt bikes. These parts are faithful reproductions of the originals.
You get all items pictured to attach a high mounted a plastic front fender to either cast iron or aluminum triple clamps:
- 4 bolts M6-1.0 X 30mm long for use with aluminum triple clamps (97323-06030-00)
- 4 bolts M6-1.0 X 25mm long for use with cast iron triple clamps (97323-06025-00)
- 4 flat washers (90201-06067-00)
- 4 lock washers (92995-06100-00)
- 4 collar washers (90387-06388-00)
- 8 rubber grommets (322-21541-00-00)
This setup was used to attach the high plastic front fenders on many bikes including:
YZ80 A, B, C
YZ125 A, B, C
YZ250 A, B, C
YZ360 A, B
YZ400 C
MX100 A, B
MX125 A, B, C
MX175 A, B
MX250 A, B
MX400 B
DT2MX
RT2MX
SC500 A
TT500 C, D, F, G, H
DT100 A, B, C
DT125 A, B, C
DT175 A, B, C
DT250 A, B, C
YZ 125 250 400 77-79
YZ 100 76-79
Brand new, injection molded Yamaha YZ & MX Front Fender. This is a direct copy from the OEM yamaha fender. Please check the pictures for the superb quality. Proudly molded in the USA. Available in yellow, white, grey and it blue.
For the following models:
1974 Yamaha MX 250/360; SC 500
1974-1976 Yamaha MX 100/125/175
1975/1976 Yamaha YZ 125/250/360/400
1975 Yamaha MX 400
1976 Yamaha IT 400
The vents in the back are not cut out. You can open them up with a dremel tool and sanding bit if you'd like.
Fits early model trail bikes with a 19" front wheel as well.
- per page
