- per page
FENDER MOUNTING HARDWARE KIT FOR PLASTIC FRONT FENDER
(32 pieces) to secure the stock plastic front fender on many early Yamaha dirt bikes. These parts are faithful reproductions of the originals.
You get all items pictured to attach a high mounted a plastic front fender to either cast iron or aluminum triple clamps:
- 4 bolts M6-1.0 X 30mm long for use with aluminum triple clamps (97323-06030-00)
- 4 bolts M6-1.0 X 25mm long for use with cast iron triple clamps (97323-06025-00)
- 4 flat washers (90201-06067-00)
- 4 lock washers (92995-06100-00)
- 4 collar washers (90387-06388-00)
- 8 rubber grommets (322-21541-00-00)
This setup was used to attach the high plastic front fenders on many bikes including:
YZ80 A, B, C
YZ125 A, B, C
YZ250 A, B, C
YZ360 A, B
YZ400 C
MX100 A, B
MX125 A, B, C
MX175 A, B
MX250 A, B
MX400 B
DT2MX
RT2MX
SC500 A
TT500 C, D, F, G, H
DT100 A, B, C
DT125 A, B, C
DT175 A, B, C
DT250 A, B, C
YZ 125 250 400 77-79
YZ 100 76-79
1973/1974 Yamaha MX 250 360, SC 500 Engine Skid Plate Black
1974-1976 Yamaha YZ, MX Front Fender Extension Available in white or translucent. Please click on the item to select a color. This extension fits on the 1974 Yamaha MX & 75/76 Yamaha YZ MX Front Fenders.
1974-1977 Yamaha YZ 80 Seat Base & Brackets
Staple gun required for seat cover installation. Does not use the metal teeth.
Will fit the following models:
1974/1975 MX 100, 125 & 175
1974/1975 YZ 125
This base does not have the molded lip on the underside of the seat base due to the vacuum forming process. You have to bolt on the stock brackets.
Available in yellow, white, or translucent. Please click on the item to select a color.
Cover up your old faded tank. Installs in minutes. Graphics will not fall off.
Available in yellow or white.
This base does not have the molded lip on the underside of the seat base due to the vacuum forming process.
Click on the title or picture to select a color.
Replaces OEM part number 3R3-14412-01-00
Cover up your old faded tank. Installs in minutes. Graphics will not fall off.
Available in yellow or white.
Protect your forks against rocks and roost! Available in yellow, white, or translucent. Click on the item to select a color.
| Brand new, injection molded Yamaha IT Headlight Holder. This is a direct copy from the OEM yamaha headlight holder. The only difference is the DC logo printed on the underside of the part. Please check the pictures for the superb quality. Proudly molded in the USA. Replaces OEM yamaha part number 4V5-84130-10-00. Accepts the stock light assembly and mounting hardware.
1981 & 1982 Yamaha IT 250 465 |
- per page
