Flanged Bushing Washer for Mounting Motorcycle Plastic 16mm OD x 3mm deep x 6mm ID
SKU: 020-66021
DC Plastics recommends using these flanged washers for mounting all motorcycle plastic where applicable. They will only work with 6mm bolts. 6mm is the typical size for most side panel, number plate, fender, etc bolts. Double check your mounts before ordering. These help distribute the weight across the mounting eyelet and do not allow the plastic to be pinched into place. Your plastic should last longer if you use these instead of flat fender washers. Sold individually.
$0.75
Flanged Bushing Washer for Mounting Motorcycle Plastic 20mm OD x 3mm deep x 6mm ID
SKU: AL6020
DC Plastics recommends using these flanged washers for mounting all motorcycle plastic where applicable. They will only work with 6mm bolts. 6mm is the typical size for most side panel, number plate, fender, etc bolts. Double check your mounts before ordering. These help distribute the weight across the mounting eyelet and do not allow the plastic to be pinched into place. Your plastic should last longer if you use these instead of flat fender washers. Sold individually.
$0.75
Round Spacer Washer Aluminum 1/4" ID x 3/4" OD x 1/4" Thick
SKU: SPACER1
1/4" ID
3/4" OD
1/4" Thick
Great for getting the perfect spacing for side panels, shrouds, etc. 6mm inside hole works with most bikes. Made from 6061 alloy.
3/4" OD
1/4" Thick
Great for getting the perfect spacing for side panels, shrouds, etc. 6mm inside hole works with most bikes. Made from 6061 alloy.
$1.15
Round Spacer Washer Aluminum 1/4" ID x 3/4" OD x 1/2" Thick
SKU: SPACER3
1/4" ID
3/4" OD
1/2" Thick
Great for getting the perfect spacing for side panels, shrouds, etc. 6mm inside hole works with most bikes. Made from 6061 alloy.
3/4" OD
1/2" Thick
Great for getting the perfect spacing for side panels, shrouds, etc. 6mm inside hole works with most bikes. Made from 6061 alloy.
$1.20
Round Spacer Washer Aluminum 1/4" ID x 3/4" OD x 1/8" Thick
SKU: SPACER2
1/4" ID
3/4" OD
1/8" Thick
Great for getting the perfect spacing for side panels, shrouds, etc. 6mm inside hole works with most bikes. Made from 6061 alloy.
3/4" OD
1/8" Thick
Great for getting the perfect spacing for side panels, shrouds, etc. 6mm inside hole works with most bikes. Made from 6061 alloy.
$1.05
Universal Vintage MX Plastic Mounting Bolts, Washers & Nuts 60 Piece
SKU: BOLTS
60 piece universal motorcycle plastic mounting hardware kit. 6mm hardware. Manufactured by Bolt Motorcycle Co. This kit includes the following:
M6x1.0x30mm (10)
M6x1.0x25mm (10)
M6x1.0x20mm (10)
M6x1.0x16mm (10)
M6x1.0 Flange Locking Nut (10)
M6x16mm Fender Washer (10)
You may need more of less of a certain size depending on your bike. Liquid cooled bikes typically use more bolts.
M6x1.0x30mm (10)
M6x1.0x25mm (10)
M6x1.0x20mm (10)
M6x1.0x16mm (10)
M6x1.0 Flange Locking Nut (10)
M6x16mm Fender Washer (10)
You may need more of less of a certain size depending on your bike. Liquid cooled bikes typically use more bolts.
$19.95
1973-1975 Suzuki TM RM 100 125 400; 74/75 TM 250 Front Fender
SKU: SUZ-FF-1973
1973-1975 Suzuki TM RM 100 125 400; 74/75 TM 250 Front Fender
Also fits the 1976 RM 100.
Also fits the 1976 RM 100.
$56.95
1980/1981 Suzuki RM PE 125 250 400; RS 175 Front Fender Yellow
SKU: SUZ-FF-1980-Y
1980/1981 Suzuki RM PE 125 250 400; RS 175 Front Fender Yellow
$56.95
1978 Suzuki RM 125 250 400; 78/79 PE 175 250 Front Fender Yellow
SKU: SUZ-FF-1978-Y
1978 Suzuki RM 125 250 400 Front Fender Yellow
$56.95
1976/1977 Suzuki RM 100 125 250 370 ; 1977 PE 250 Front Fender
SKU: SUZ-FF-1976
1976/1977 Suzuki RM 125 250 370 Front Fender
1977 RM 100 as well.
Available in yellow or translucent.
1977 RM 100 as well.
Available in yellow or translucent.
$56.95
1984-1988 Suzuki RM 125 250 Front Fender Yellow
SKU: SUZ-FF-1984-Y
1984-1988 Suzuki RM 125 250 Front Fender Yellow
$56.95
1982-1983 Suzuki RM 125 250 465, 84/85 RM 500 Front Fender Yellow
SKU: SUZ-FF-1981-Y
1982-1983 Suzuki RM 125 250 465, 84/85 RM 500 Front Fender Yellow
Will also fit the 82-84 PE 175 model.
Will also fit the 82-84 PE 175 model.
$56.95
1979 Suzuki RM 125 250 400 Front Fender Yellow
SKU: SUZ-FF-1979-Y
1979 Suzuki RM 125 250 400 Front Fender Yellow
$56.95
1972 1973 Suzuki TM 250, 71/72 TM 400 Front Fender Mud Guard
SKU: SUZ-FF-1972TM250
1972 1973 Suzuki TM 250, 71/72 TM 400 Front Fender Mud Guard
Available in orange, yellow or black.
Available in orange, yellow or black.
$56.95
1977/1978 Suzuki RM 80 RM80 Front Fender
SKU: SUZ-FF-1977RM80
1977/1978 Suzuki RM 80 RM80 Front Fender. Molded from an OEM fender. Manufactured from high density polyethylene plastic. Matte finish.
$56.95
1977 1978 Suzuki RM 50 Front Fender Mud Guard
SKU: SUZ-FF-1977RM50
1977/1978 Suzuki RM 50 RM50 Front Fender. Molded from an OEM fender. Manufactured from high density polyethylene plastic. Satin finish.
$56.95
1983-1985 Suzuki RM 80 Front Fender
SKU: SUZ-FF-1983RM80
1983-1985 Suzuki RM 80 Front Fender. Manufactured from high density polyethylene plastic. All of our plastic has a satin finish. Please read our FAQ page for all questions.
$56.95
1980-1982 Suzuki RM 80 Front Fender
SKU: SUZ-FF-1980RM80
1980-1982 Suzuki RM 80 Front Fender. Manufactured from high density polyethylene plastic. All of our plastic has a satin finish. Please read our FAQ page for all questions.
$56.95
1979 Suzuki RM 80; 79-81 RM 50 60 Front Fender
SKU: SUZ-FF-1979RM80
1979 Suzuki RM 80; 79-81 RM 50 60 Front Fender
$56.95
