- per page
Flanged Bushing Washer for Mounting Motorcycle Plastic 16mm OD x 3mm deep x 6mm ID
SKU: 020-66021
DC Plastics recommends using these flanged washers for mounting all motorcycle plastic where applicable. They will only work with 6mm bolts. 6mm is the typical size for most side panel, number plate, fender, etc bolts. Double check your mounts before ordering. These help distribute the weight across the mounting eyelet and do not allow the plastic to be pinched into place. Your plastic should last longer if you use these instead of flat fender washers. Sold individually.
$0.75
Flanged Bushing Washer for Mounting Motorcycle Plastic 20mm OD x 3mm deep x 6mm ID
SKU: AL6020
DC Plastics recommends using these flanged washers for mounting all motorcycle plastic where applicable. They will only work with 6mm bolts. 6mm is the typical size for most side panel, number plate, fender, etc bolts. Double check your mounts before ordering. These help distribute the weight across the mounting eyelet and do not allow the plastic to be pinched into place. Your plastic should last longer if you use these instead of flat fender washers. Sold individually.
$0.75
Round Spacer Washer Aluminum 1/4" ID x 3/4" OD x 1/8" Thick
SKU: SPACER2
1/4" ID
3/4" OD
1/8" Thick
Great for getting the perfect spacing for side panels, shrouds, etc. 6mm inside hole works with most bikes. Made from 6061 alloy.
3/4" OD
1/8" Thick
Great for getting the perfect spacing for side panels, shrouds, etc. 6mm inside hole works with most bikes. Made from 6061 alloy.
$1.05
Round Spacer Washer Aluminum 1/4" ID x 3/4" OD x 1/4" Thick
SKU: SPACER1
1/4" ID
3/4" OD
1/4" Thick
Great for getting the perfect spacing for side panels, shrouds, etc. 6mm inside hole works with most bikes. Made from 6061 alloy.
3/4" OD
1/4" Thick
Great for getting the perfect spacing for side panels, shrouds, etc. 6mm inside hole works with most bikes. Made from 6061 alloy.
$1.15
Round Spacer Washer Aluminum 1/4" ID x 3/4" OD x 1/2" Thick
SKU: SPACER3
1/4" ID
3/4" OD
1/2" Thick
Great for getting the perfect spacing for side panels, shrouds, etc. 6mm inside hole works with most bikes. Made from 6061 alloy.
3/4" OD
1/2" Thick
Great for getting the perfect spacing for side panels, shrouds, etc. 6mm inside hole works with most bikes. Made from 6061 alloy.
$1.20
Universal Vintage MX Plastic Mounting Bolts, Washers & Nuts 60 Piece
SKU: BOLTS
60 piece universal motorcycle plastic mounting hardware kit. 6mm hardware. Manufactured by Bolt Motorcycle Co. This kit includes the following:
M6x1.0x30mm (10)
M6x1.0x25mm (10)
M6x1.0x20mm (10)
M6x1.0x16mm (10)
M6x1.0 Flange Locking Nut (10)
M6x16mm Fender Washer (10)
You may need more of less of a certain size depending on your bike. Liquid cooled bikes typically use more bolts.
M6x1.0x30mm (10)
M6x1.0x25mm (10)
M6x1.0x20mm (10)
M6x1.0x16mm (10)
M6x1.0 Flange Locking Nut (10)
M6x16mm Fender Washer (10)
You may need more of less of a certain size depending on your bike. Liquid cooled bikes typically use more bolts.
$19.95
1981-1983 Suzuki RM 125 250 465; 83/84 RM 500 Works Replica Single Side Airbox Assembly Side Panel
SKU: RMWORKSBOX-SP
1981-1983 Suzuki RM 125 250 465; 83/84 RM 500 Works Replica Single Side Air box Assembly Side Panel. Custom cut to fit with the works replica airbox assembly. Save your stock side panel and run this one!
$29.95
1974-1976 Suzuki TM 75; 75-77 TS 75 Side Panels
SKU: SUZ-SP-1974TM75
1974-1976 Suzuki TM 75; 75-77 TS 75 Side Panels
Available in black or yellow.
Available in black or yellow.
$61.95
1977 1978 Suzuki RM 50 Side Panels Number Plates
SKU: SUZ-SP-1977RM50
1977/1978 Suzuki RM 50 RM50 Side Panels. Molded from an OEM pair of panels. Manufactured from high density polyethylene plastic. Satin finish. The mounting eyelets are not as deep as the stock panels. You will need to use spacers behind the mounts to get the correct fit.
$61.95
1973-1975 Suzuki TM 100, 125 Side Panels
SKU: SUZ-SP-1973TM125
1973-1975 Suzuki TM 100, 125 Side Panels
$66.95
1973-1975 Suzuki TM 400 Side Panels
SKU: SUZ-SP-1973TM400
1972-1975 Suzuki TM 400 Side Panels
$66.95
1974 1975 Suzuki TM 250 Side Panels
SKU: SUZ-SP-1974TM250
1974 1975 Suzuki TM 250 Side Panels
$66.95
1976 1977 1978 Suzuki RM 125; 78/79 PE 175 Side Panels
SKU: SUZ-SP-1976RM125
1976-1978 Suzuki RM 125 Side Panels. They will also fit the 78/79 PE 175 and 77/78 RM 100.
We have them available with the vents cut out or without vents.
We have them available with the vents cut out or without vents.
$66.95
1976-1978 Suzuki RM 125 250 370 400 DG Replica Side Panels
SKU: SUZ-SP-1976DG
Make your racer a true DG replica bike from the 70's! These are available in yellow or translucent.
$66.95
1976-1978 Suzuki RM 250 370 400; 77-79 PE 250 Side Panels
SKU: SUZ-SP-1976250
1976-1978 Suzuki RM 250 370 400 Side Panels. These will also fit the 1977-1979 Suzuki PE 250.
$66.95
1979-1981 Suzuki RM 50 60 Side Panels
SKU: SUZ-SP-1979RM60
1979-1981 Suzuki RM 50 60 Side Panels
$66.95
- per page
