Home :: Electrical :: Kawasaki HPI Ignitions

Kawasaki HPI Ignitions

Products

HPI Complete Ignition 1974-1981 Kawasaki KX 125 ; 79-81 KX 250
SKU: 068K069
Fits the following models:
1974-1981 Kawasaki KX 125 ; 79-81 KX 250

The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has no lighting coils. It is for motocross use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes.

All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.
$274.95
Qty
Add to wish list
HPI Complete Ignition 1979 1980 1981 1982 Kawasaki KLX 250
SKU: 068K448

The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has no lighting coils. It is for motocross use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes.

All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.
$314.95
Qty
Add to wish list
HPI Complete Ignition 1982-2008 Kawasaki KX 250 ; 84/85 KDX 200 ; 84-87 KXT Tecate
SKU: 068K156
Fits the following models:
1982-2008 Kawasaki KX 250 ; 84/85 KDX 200 ; 84-87 KXT Tecate

The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has no lighting coils. It is for motocross use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes.

All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.
$274.95
Qty
Add to wish list
HPI Complete Ignition 1983-2004 Kawasaki KX 500
SKU: 068K296

Fits the following models: 1983-2004 Kawasaki KX 500 The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has no lighting coils. It is for motocross use.

HPI is the go to source for electronic ignitions for vmx and pvmx bikes. All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.

$274.95
Qty
Add to wish list
HPI Digital CDI Curve Switch
SKU: 068v064
HPI Digital CDI Curve Switch

This only works with the HPI programmable 2 map CDI.

$14.95
Qty Out of stock
HPI Ignition 1982-2008 Kawasaki KX 250 ; 80-88 KDX 175 200 ; 84-87 KXT Tecate w/ Lighting
SKU: 210K156
Fits the following models: KX125 (1992-2008) 125cc/2stroke, KDX175 (1980-1982) 175cc/2stroke, KDX200 (1983-1988) 200cc/2stroke, KX250 (1982-2008) 250cc/2stroke and KXT250 Tecate (1984-1987).

The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has lighting coils. It is for motocross or enduro use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes.

All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.
$274.95
Qty
Add to wish list
HPI Interface Cable and Tuning Software Download for the Programmable CDI
SKU: 068v043
HPI Interface Cable and Tuning Software Download for the Programmable CDI

This only works with the HPI programmable single or dual map CDI.

$164.95
Qty
Add to wish list
HPI Programmable Digital CDI w/ 2 Preset Curves
SKU: 068C042-2CP
HPI Programmable CDI with 2 maps.

You still need to purchase the HPI curve switch and tuning software kit to use this CDI to it's potential. It will only work with HPI kits. Does not work with your OEM electrical components.

Works as an upgrade for the following kits:
068K004, 068K008, 068K009, 068K010, 068K011, 068K012, 068K013, 068K014, 068K015, 068K016, 068K017, 068K026, 068K029, 068K039, 068K040, 068K047, 068K048, 068K050, 068K051, 068K053, 068K055, 068K056, 068K059, 068K063, 068K067, 068K069, 068K070, 068K072, 068K076, 068K086, 068K094, 068K095, 068K096, 068K099, 068K102, 068K104, 068K110, 068K126, 068K129, 068K134, 068K135, 068K140, 068K141, 068K156, 068K159, 068K168, 068K177, 068K189, 068K191, 068K196, 068K199, 068K214, 068K215, 068K221, 068K223, 068K231, 068K240, 068K244, 068K247, 068K266, 068K274, 068K286, 068K288, 068K292, 068K298, 068K299, 068K319, 068K336, 068K337, 068K343, 068K352, 068K392, 068K421, 068K425, 068K432, 068K444, 068K456, 068K457
$224.95
Qty
Add to wish list
HPI Racing Ignition Inner Rotor 68 Series Flywheel Puller
SKU: 068V262

HPI Ignition universal inner rotor flywheel 68 series puller.

$12.95
Qty
Add to wish list
HPI Racing Ignition Inner Rotor 68 Series Flywheel Weight 10 Ounce
SKU: 068V101
HPI Ignition flywheel weight. 10 ounces. These only work with the HPI flywheels. They will not work on stock ignitions.
$34.95
Qty
Add to wish list
HPI Racing Ignition Outer Rotor 210 Series Flywheel Puller M27 1mm Left Hand Thread
SKU: 210V251
HPI Racing Ignition Outer Rotor 210 Series Flywheel Puller M27 1mm Left Hand Thread
$12.95
Qty
Add to wish list
HPI Racing Ignition Outer Rotor 210 Series Flywheel Weight 10 Ounce
SKU: 210V257
HPI Ignition flywheel weight. Outer rotor style. 10 ounces. These only work with the HPI flywheels. They will not work on stock ignitions.
$34.95
Qty
Add to wish list