Home :: Electrical :: Hodaka, CZ, Montesa, Ossa & Bultaco

Hodaka, CZ, Montesa, Ossa & Bultaco

Products

HPI Complete Ignition 1973-1982 Montesa VA VB VE VF VG 250 360 414
SKU: 068K315
Fits the following models:
Cappra 250 VR (1973) 250cc/2stroke
Cappra 250 V75 (1974) 250cc/2stroke
Cappra 250 VA (1975) 250cc/2stroke
Cappra 250 VB (1976-1978) 250cc/2stroke
Cappra 250 VE (1979) 250cc/2stroke
Cappra 250 VF (1980) 250cc/2stroke
Cappra 250 VG (1981-1982) 250cc/2stroke
Cappra 360 VA (1975) 360cc/2stroke
Cappra 360 VB (1976-1978) 360cc/2stroke
Enduro 360 H6 (1978-1981) 360cc/2stroke
Enduro 360 H7 (1983-1984) 360cc/2stroke
Cappra 414 VE (1979) 414cc/2stroke
Cappra 414 VF (1980) 414cc/2stroke
Cappra 414 VG (1981-1982) 414cc/2stroke

The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has no lighting coils. It is for motocross use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes.

All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.


$274.95
Qty
Add to wish list
HPI Complete Ignition for Hodaka 125 Combat & Wombat / Super Rat 100
SKU: 068K-HOD

Fits the following models:

Model 98 100cc super rat
Model 97 125cc super combat
Model 95 125cc combat wombat
Model 94 Wombat
Model 92c dirt squirt 100cc
Model 99 road toad 100cc
Model 03 wombat 125cc
Model 92c/01 dirt squirt 100cc

The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has no lighting coils. It is for motocross use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes. The most affordable vmx ignition system that you will find. Yes, they last just as long as all of the other electronic ignition systems on the market today.

All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened. Includes free UPS Ground shipping in the USA.

$274.95
Qty
Add to wish list
HPI Complete Ignition for Hodaka 125 Combat & Wombat / Super Rat 100 w/ Lighting Coil
SKU: 210KHOD

Fits the following models:

Model 98 100cc super rat
Model 97 125cc super combat
Model 95 125cc combat wombat
Model 94 Wombat
Model 92c dirt squirt 100cc
Model 99 road toad 100cc
Model 03 wombat 125cc
Model 92c/01 dirt squirt 100cc

The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has a lighting coil. It is for motocross or enduro use. You will need a rectifier and switch to run lights. HPI is the go to source for electronic ignitions for vmx and pvmx bikes. The most affordable vmx ignition system that you will find. Yes, they last just as long as all of the other electronic ignition systems on the market today.

All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.

$274.95
Qty
Add to wish list
HPI Digital CDI Curve Switch
SKU: 068v064
HPI Digital CDI Curve Switch

This only works with the HPI programmable 2 map CDI.

$14.95
Qty Out of stock
HPI Interface Cable and Tuning Software Download for the Programmable CDI
SKU: 068v043
HPI Interface Cable and Tuning Software Download for the Programmable CDI

This only works with the HPI programmable single or dual map CDI.

$164.95
Qty
Add to wish list
HPI Programmable Digital CDI w/ 2 Preset Curves
SKU: 068C042-2CP
HPI Programmable CDI with 2 maps.

You still need to purchase the HPI curve switch and tuning software kit to use this CDI to it's potential. It will only work with HPI kits. Does not work with your OEM electrical components.

Works as an upgrade for the following kits:
068K004, 068K008, 068K009, 068K010, 068K011, 068K012, 068K013, 068K014, 068K015, 068K016, 068K017, 068K026, 068K029, 068K039, 068K040, 068K047, 068K048, 068K050, 068K051, 068K053, 068K055, 068K056, 068K059, 068K063, 068K067, 068K069, 068K070, 068K072, 068K076, 068K086, 068K094, 068K095, 068K096, 068K099, 068K102, 068K104, 068K110, 068K126, 068K129, 068K134, 068K135, 068K140, 068K141, 068K156, 068K159, 068K168, 068K177, 068K189, 068K191, 068K196, 068K199, 068K214, 068K215, 068K221, 068K223, 068K231, 068K240, 068K244, 068K247, 068K266, 068K274, 068K286, 068K288, 068K292, 068K298, 068K299, 068K319, 068K336, 068K337, 068K343, 068K352, 068K392, 068K421, 068K425, 068K432, 068K444, 068K456, 068K457
$224.95
Qty
Add to wish list
HPI Racing Ignition Inner Rotor 68 Series Flywheel Puller
SKU: 068V262

HPI Ignition universal inner rotor flywheel 68 series puller.

$12.95
Qty
Add to wish list
HPI Racing Ignition Inner Rotor 68 Series Flywheel Weight 10 Ounce
SKU: 068V101
HPI Ignition flywheel weight. 10 ounces. These only work with the HPI flywheels. They will not work on stock ignitions.
$34.95
Qty
Add to wish list
HPI Racing Ignition Outer Rotor 210 Series Flywheel Puller M27 1mm Left Hand Thread
SKU: 210V251
HPI Racing Ignition Outer Rotor 210 Series Flywheel Puller M27 1mm Left Hand Thread
$12.95
Qty
Add to wish list
HPI Racing Ignition Outer Rotor 210 Series Flywheel Weight 10 Ounce
SKU: 210V257
HPI Ignition flywheel weight. Outer rotor style. 10 ounces. These only work with the HPI flywheels. They will not work on stock ignitions.
$34.95
Qty
Add to wish list
New HPI Ignition 1980 Can Am MX6 250, 82/83 SWM TF3 175, Rotax 244, 280, 281, 282, 366, 406 Engines
SKU: 210K416
New HPI Complete Ignition 1980 Can Am MX6 250, 82/83 SWM TF3 175, Rotax 244, 280, 281, 282, 366, 406 Engines

The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has lighting coils. It is for motocross or enduro use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes. We have a 99% success rate with these ignitions.

All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.
$274.95
Qty
Add to wish list
New HPI Inner Rotor Complete Ignition 1966 CZ Twin Pipe 360; 1969/1970 Single Pipe 360 380
SKU: 068K173
New HPI Inner Rotor Complete Ignition 1966 CZ Twin Pipe 360; 1969/1970 Single Pipe 360 380

The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has no lighting coils. It is for motocross use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes.

All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.
$274.95
Qty
Add to wish list