- per page
FENDER MOUNTING HARDWARE KIT FOR PLASTIC FRONT FENDER
(32 pieces) to secure the stock plastic front fender on many early Yamaha dirt bikes. These parts are faithful reproductions of the originals.
You get all items pictured to attach a high mounted a plastic front fender to either cast iron or aluminum triple clamps:
- 4 bolts M6-1.0 X 30mm long for use with aluminum triple clamps (97323-06030-00)
- 4 bolts M6-1.0 X 25mm long for use with cast iron triple clamps (97323-06025-00)
- 4 flat washers (90201-06067-00)
- 4 lock washers (92995-06100-00)
- 4 collar washers (90387-06388-00)
- 8 rubber grommets (322-21541-00-00)
This setup was used to attach the high plastic front fenders on many bikes including:
YZ80 A, B, C
YZ125 A, B, C
YZ250 A, B, C
YZ360 A, B
YZ400 C
MX100 A, B
MX125 A, B, C
MX175 A, B
MX250 A, B
MX400 B
DT2MX
RT2MX
SC500 A
TT500 C, D, F, G, H
DT100 A, B, C
DT125 A, B, C
DT175 A, B, C
DT250 A, B, C
YZ 125 250 400 77-79
YZ 100 76-79
1988 1989 1990 1991 ATK 250 406 Side Panels Number Plates
Available in white or red.
1992 ATK 250 406 350 604 Rear Fender Mud Guard White
- Super heavy duty chain with DHA, a very hard chromium carbide layer, suface treatment on pins.
- Greater wear resistance and anti-oxidation performance providing under critical conditions.
- Solid bushings and quad riveted pins.
- One of the best 428 chain on the market today.
- Uses a circlip link.
- 132 links
- Super heavy duty chain with DHA, a very hard chromium carbide layer, suface treatment on pins.
- Greater wear resistance and anti-oxidation performance providing under critical conditions.
- Solid bushings and quad riveted pins.
- One of the best 428 chain on the market today.
- Uses a circlip link.
- 130 links
Click on the title or picture to select a length.
- D.I.D. is the #1 chain manufacturer in the world
- Solid rollers
- Shot-peened parts
- High cylindrical and roundness accuracy
- Exacting tolerances provide low friction
- Pre-stretched
- Extended riveted bushing "Anti-Kink" design
- Special alloy steel
- Average tensile strength of 7,200 lbs.
- High performance value of o-ring chain
- D.I.D. is the #1 chain manufacturer in the world
- Solid rollers
- Shot-peened parts
- High cylindrical and roundness accuracy
- Exacting tolerances provide low friction
- Pre-stretched
- Extended riveted bushing "Anti-Kink" design
- Special alloy steel
- Average tensile strength of 8100 lbs.
- Quality engineered for strength and durability
- All chains are pre-stretched for perfect balance in every pitch
- Heavy duty chains have "Quad Staked" riveted pins for added strength
- Complete with oiling hole in the bushing to insure proper lubrication
- One masterlink in each box.
Standard, natural color.
Features:
- Designed and manufactured in Japan
- Hardened and shot peened components
- Solid rollers, pre-stretched
- All chains supplied with clip style master links
- Designed and manufactured in Japan
- Hardened and shot peened components
- Solid rollers, pre-stretched
- All chains supplied with clip style master links
DC Plastics recommends using these flanged washers for mounting all motorcycle plastic where applicable. They will only work with 6mm bolts. 6mm is the typical size for most side panel, number plate, fender, etc bolts. Double check your mounts before ordering. Some models to not have enough room at the bolt hole to fit these washers. These help distribute the weight across the mounting eyelet and do not allow the plastic to be pinched into place. Your plastic should last longer if you use these instead of flat fender washers. Sold individually.
DC Plastics recommends using these flanged washers for mounting all motorcycle plastic where applicable. They will only work with 6mm bolts. 6mm is the typical size for most side panel, number plate, fender, etc bolts. Double check your mounts before ordering. Some models to not have enough room at the bolt hole to fit these washers.
These help distribute the weight across the mounting eyelet and do not allow the plastic to be pinched into place. Your plastic should last longer if you use these instead of flat fender washers. Sold individually.
- High quality pins, bushings and rollers for maximum durability
- All pins are 4 point riveted
- Longer wear life than RK standard chain
- U-Ring sealing technology
- Bright Gold Finish
- The lightest oring chain the market today.
- Great for 250 and up vintage bikes.
3/4" OD
1/2" Thick
Great for getting the perfect spacing for side panels, shrouds, etc. 6mm inside hole works with most bikes. Made from 6061 alloy.
3/4" OD
1/4" Thick
Great for getting the perfect spacing for side panels, shrouds, etc. 6mm inside hole works with most bikes. Made from 6061 alloy.
- per page
