Home :: Products Map

Products Map

$ A B C D E F G H J K L M N O P R S T U V W Y #


New Dachi Fork Tubes for 1968 1969 Yamaha DT1 250
SKU: DC351-4441
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. An OEM replica quality part. No chinese junk here. These tubes do narrow at the clamps just like the stock ones. They are not 34mm the entire length. Check your clamps to make sure these are what you need.

These tubes have six bleed holes at the bottom and no groove for a retaining clip near the bleed holes. Compare with your original tubes to be sure they are what you need.

These may work on the 1970 model but the bottom of the tubes differ slightly.
$219.95
Qty Out of stock
New Dachi Fork Tubes for 1971-1976 Yamaha DT1 RT1 DT2 RT2 DT 250 360 400 34mm
SKU: DC351-4444
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. 34mm OD.

Replaces yamaha part number 291-23124-60-00
$219.95
Qty Out of stock
New Dachi Fork Tubes for 1974 1975 Honda CR 125 & 74-76 MT 125 Elsinore
SKU: DC351-1112
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. An OEM replica quality part. No chinese junk here.

These tubes are the threaded cap style. You have to use the 1974 caps.
$209.95
Qty
Add to wish list
New Dachi Fork Tubes for 1974-1976 Suzuki TS 250; 74-77 TS 400
SKU: DC351-3445

A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations.

23.625" long

34mm diameter

$219.95
Qty
Add to wish list
New Dachi Fork Tubes for 1976 Suzuki RM 125 A 51111-41310
SKU: DC351-3114
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations.

Replaces OEM # 51111-41310

$209.95
Qty
Add to wish list
New Dachi Fork Tubes for 1976 Yamaha YZ 125 X
SKU: DC351-4115
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations.

125 X Model only.
$209.95
Qty
Add to wish list
New Dachi Fork Tubes for 1977 1978 Yamaha DT 250 400 34mm
SKU: DC351-4445
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations.

34mm diameter

Replaces OEM number 1M1-23124-00-00
$209.95
Qty
Add to wish list
New Dachi Fork Tubes for 1977 Suzuki RM 125 B 51110-41312
SKU: DC351-3115
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations.

Replaces OEM # 51110-41312

$209.95
Qty
Add to wish list
New Dachi Fork Tubes for 1979 1980 Suzuki 125 RM 250 400 38mm
SKU: DC351-3117
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. 29.50" in length.

Replaces OEM Part # 51110-40300

$219.95
Qty
Add to wish list
New Dachi Fork Tubes for 1981 Yamaha YZ 125 and 1981 IT 250 465 38mm
SKU: DC351-4120
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. An OEM replica quality part. No chinese junk here. 38mm OD tubes. Replaces OEM part number 4V2-23110-L0-00.
$239.95
Qty
Add to wish list
New Dachi Fork Tubes for Yamaha AT DT 125; CT DT 175 1972-1977 315-23124-50-00
SKU: DC351-4422
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations.

Replaces OEM # 315-23124-50-00

$209.95
Qty
Add to wish list
New Dachi Front Fork Tubes for 1977 1978 Yamaha YZ 400 38mm
SKU: DC351-4146
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. Replaces OEM part number 2K8-23110-L0-00. 38mm outside diameter.
$239.95
Qty Out of stock
New Dachi Front Fork Tubes for 1980 Yamaha YZ 250 465 38mm
SKU: DC351-4148
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. Replaces OEM part number 3R4-23124-L0-00. 38mm outside diameter.
$239.95
Qty
Add to wish list
New Dachi Front Fork Tubes for 1982 Yamaha YZ 125 and 1982 IT 175 250 465 38mm
SKU: DC351-4121
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. An OEM replica quality part. No chinese junk here. 38mm OD tubes. Replaces OEM part number 5X4-23110-L0-00.
$239.95
Qty
Add to wish list
New Dachi Front Fork Tubes for 1984 1985 Yamaha IT 200 IT200 43mm
SKU: DC351-4124
A new reproduction pair of front fork tubes. These are all made in Japan for the best quality available. They are made specifically for each year. The tubes use the stock size seals and are the exact same size as the original tubes. Great for racing and restorations. An OEM replica quality part. No chinese junk here. 43mm OD tubes. Replaces OEM part number 43M-23110-L0-00.
$249.95
Qty
Add to wish list
New Design DC Plastics Logo T Shirt
SKU: DCTSHIRT
Heavy duty screen printed logo. Available in adult sizes only. DC logo is on the back. The owner, Don Claerhout, on his 1983 maico 490 is printed on the front with white lettering.
$22.95

Add to wish list
New Front Fork Tubes that fit 1974 1975 1976 Husqvarna 250 360 400 450 Black Leg Forks
SKU: DC45-43100/43101
  • Easily replace fork tubes that are pitted, corroded or are bent.
  • Industrial hard chromed, then centerless ground with tolerances held to +/- 0.02mm (0.00078in.) for accurate fit and longevity.
  • Sold in pairs.
  • 220HBS hardness. AISI SAE 1045 carbon steel.
  • Replaces OEM HSQ part number 15 12 170-01
  • 23.25 inches in length
  • 35mm outer diameter
  • 28.70mm inside diameter
  • These include the bottom nut.
  • These tubes will work on the 66-73 250 and up model lower legs if you use the later model internals and cap.

These tubes were made for restorations and grass track racing. If you are racing on modern mx tracks with large jumps, you may bend the tubes. 

$224.95
Qty
Add to wish list
New HPI Complete Ignition 1976 1977 1978 1979 1980 1981 Yamaha TT 500
SKU: 068K167

The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has no lighting coils. It is for motocross use.

HPI is the go to source for electronic ignitions for vmx and pvmx bikes. All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.

$299.95
Qty
Add to wish list
New HPI Complete Ignition 1977 1978 1979 Husqvarna 390
SKU: 210K414
New HPI Complete Ignition 1977 1978 1979 Husqvarna 390

The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has lighting coils. It is for motocross use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes.

All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.
$274.95
Qty
Add to wish list
New HPI Complete Ignition 1979 1980 1981 1982 Honda XR 500
SKU: 068K148
The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has no lighting coils. It is for motocross use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes.

All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.

These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.

Includes free UPS Ground shipping in the USA.
$284.95
Qty
Add to wish list